Mobile Crane Sany Model SCC750A 2020 Used GPS Satellite Positioning

2020 model Sany SCC750A Multifunctional Used Crawler Cranes, SCC750A multifunctional crawler crane is multi-purpose, strong tamping, SDDC, punching grapple, piling, vibration punching, lifting and so on, vibratory hammer, hydraulic hammer power transmission technology, strong power, high efficiency and reliability, intelligent and low consumption.

• Installation/working mode switch: In installation mode, the auxiliary action is effective to facilitate crane installation; in working mode, the auxiliary action is not effective.
• Emergency stop: In case of emergency, pressing the emergency stop button can cut off the power supply of the whole machine and stop all actions.
• Function Lock: If the function locking handle is not in position, all other function operating handles will be disabled, which can avoid misoperation due to body collision when getting on and off the vehicle.
• Slewing locking device: This device can lock the crane in front, back and two directions.
• Crane arm limit device: When the elevation angle of the lifting arm is greater than 80°, the buzzer will alarm and the operation of the lifting arm will be cut off. This protection function is controlled by a single-stage travel switch.
• Crane arm anti-tilt device: This device consists of a nested steel tube and a spring. It prevents the boom from tilting back by buffering the boom's tilting energy with spring force.
• Boom Angle Indicator: Pendulum type angle indicator, fixed on the cab side of the lower boom. It is convenient for the operator to check.
• Lifting Hooks Anti-Dislodgement: The lifting hooks are equipped with stoppers to prevent the wire rope from falling off.
• Monitoring system: Remote monitoring system is equipped as standard, which can realize GPS satellite positioning, GPRS data transmission, querying and statistics of equipment use status, monitoring and analyzing of operation data, and remote diagnosis of faults.
• Slewing indicator device: When the machine is traveling or rotating, the rotating indicator light is flashing.
• Lighting: Equipped with low beam light in front of the cab, adjustable high beam light in front, light inside the cab and light behind the winch, which can improve the visibility during construction.
• Rearview mirrors: The rearview mirrors are installed on the left side of the cab and the front armrest of the right hood, which are convenient for monitoring the rear condition of the whole machine.
• Driver's cab protective cover: Metal guards are installed on the front, top and inner sides of the cab to block the splash during construction and ensure the safety of personnel and machine.